Skip to content
jaydmc
@jaydmc
Noble Member
Joined: June 14, 2011 5:09 am
Topics: 73 / Replies: 1716
Reply
RE: 1989 GL 1500 with CSC issues/questions....

You need to start over, get the sidecar sitting level. Here is a link tell you how to set it all up. Toe should be about 1 1/4 inch on this bike. Ja...

11 years ago
Reply
RE: safer whole sale, and now RT

There is a company in the USA selling sidecars through Safer Whole sale, I see these sidecars on craigs list from people who purchased the sidecars an...

11 years ago
Topic
Replies: 85
Views: 3848
Reply
RE: tires

We have been happy with Heidenau tires, they have tires in your size and soon will also have a 4:00 19. Full disclosure, we are a dealer for Heinena...

11 years ago
Reply
RE: Assembling a Hack

You really need to move the jerry cans, The weight is in the wrong location, you will not be happy with how it rides with these full. Jay G DMC si...

11 years ago
Reply
RE: Quick disconnects

I disagree, we use quick disconnects and you do not need to bleed the brakes if you know how to use them. What you do is turn the female end up right,...

11 years ago
Reply
RE: Tire wear

Your alignment is off and your tire is a bit over inflated. Here is a link showing how to set alignment. Jay G DMC sidecars www.dmcsidecars.com ...

11 years ago
Reply
RE: Side-car mounting GL1500 and Vetter Terraplane ?

When we do Terraplane we do so by converting them over to a standard 4 point mount. We make a bolt on kit to do this $775, we then go with our standar...

11 years ago
Reply
RE: Turning Force required

When ever you convert from three to two wheels you end up with heavy steering unless you reduce trail on the front of the bike. To reduce trail the fr...

11 years ago
Reply
RE: Moto Guzzi California / Texas Ranger rig

It was mounted with our mounting hardware as Texas often would buy Moto Guzzi hardware from us, price point is good, if you want lighter steering we m...

11 years ago
Reply
RE: Velorex wheel bearings binding

You might check that the sidecar axle is not bent. Jay G DMC sidecars 866-638-1793 www.dmcsidecars.com

11 years ago
Reply
RE: California sidecar

Older California sidecars never had brakes, Brakes are almost always a good idea and we do offer a retro fit brake kit that does require welding. Thes...

11 years ago
Reply
RE: Aluminum Vs Fiberglass

All of the sidecars we build are hand laid fiberglass done in house with high quality resin's and extra layers of cloth where needed. Jay G DMC si...

11 years ago
Reply
RE: Aluminum Vs Fiberglass

Here is a link to our web site where we have an article on just this Jay G DMC sidecars www.dmcsidecars.com 866-638-1793

11 years ago
Reply
RE: cfs f1 tire/wheel help needed!

The 145 just fits under the fender. Coker tire offers these. We have also changed a few over to 12 inch wheels as 145 12 tires are not problem at all ...

11 years ago
Page 57 / 120