I've found that narrow front tire will sideslip in hard turns. Not a big enough footprint for good lateral traction. This is not a problem with a so...
The upper rear mount is the tough one yo access on the ElectraGlides. Don't wrap the frame tube with anything. It will make the clamps slip and rota...
Here are pix of a CSC mounting setup on a 2003 Ultra using CSC mounts. I relieved the right lower fairing for strut clearance so it could be retained...
On the ones I've worked with the extension just adds another mounting position. The other is still there. The extension being just an added 12" loo...
With the 21" front wheel you have a slightly different total trail than a stock setup so your experience may be a little different than one with a sto...
The Harley will need a mount set (sub-frame) to install this car. The sidecar heim joint lower mounts and the struts will work with the Harley sub-fr...
If using Harley oil it would be "Screamin' Eagle" label. Others list Heavy Duty usage (HD). Lonnie
Use HD or racing oil in the front forks and keep the air at maximum factory setting. Lonnie
You won't need the damper. It just slows the steering down and makes for more resistance and less road feedback. Lonnie
Ballast is one of the subjects that get revisited often. Got a particular question or questions regarding ballast? Lonnie
Shanda, I used to have friends who lived in Bullhead City (part time). A group of Harley riders who called themselves "Bullheads". We won't ...
Two Canadian Buds and myself are heading into AZ in two weeks. Our only agreed destination is Tombstone. After that, whatever comes to mind. We usu...
The 1156 is 32 CP single filament stop light lamp. I checked my shop lamps and found a single filament Chech 21 CP bulb, a GE 1073HI 21W and a P21W ...
The combination of raked trees and flat tread automobile tire are enough to cause this at speed. You lucked out, it could have developed into a tank ...
The flex in the sidecar upper mounting bar is normal. This is due to the three point mounting. A little flex eases the stress on the unit. I have ...