As pretty much every sidecar that has brakes ties the brake to the swing arm. The brake will not cause the sidecar to rise or drop noticeably at all. ...

All pricing has not been set as of yet. Base price is $895 The main frame section is 20 X 40 inches however we can also customize to different specifi...

They all tend to be to stiff however if you go with UCF America they have a very light duty unit that can be purchased where the swing arm is attached...

Looks like a Velorex frame clamp, Motovation frame clamps, one of our frame clamps and one piece of flat steel bent around the frame. In general frame...

Not sure the sure on the bearing number as we seldom do these any longer, It has been perhaps 15 years since the last one as I try not to work with Ve...

You can find information on all S/tep (sidecar trike education program) at this link The book "Driving a sidecar outfit also has good information whi...

Go with a 20mm axle. There is a bearing that you can change out that will work at 20mm. You will need to change the spacer between the bearings. You c...

The trailer tows best off of the center of the bike, but as you have figured out you end up with a rig that is way to wide. The more you move the trai...

Sorry, I do not remember off hand, I can ask my general manger who designed the body however we have been without power at the shop for 2 days and wil...

I am not an expert on HD sidecars however in 2003 Harley dropped a fitting on the side of the frame on the bike. This fitting looks like a large nut w...

The issue with the Vetter is that it used a non traditional 3 point mount with no upper front and the upper rear being adjustable on the fly. They als...

One issue with many of the lower priced sidecars that are made over sea's is that the come with "universal" type mounts which seldom work well on any ...

The very early sidecars had external trunk hinges, latter ones had hidden internal hinges at the top. Only the first year or two of production had the...