Most modern mounts use 2 lower mounts rather then the way you did with only a single. This makes it easy to set your toe in. I suspect that with the s...

Either way will work fine as long as the underlying design work is done correctly. 4 point is more common then 3 point, there are also hybrid mounts l...

When setting up your rig, First pre load the suspension on the bike to how it is with you on the bike. We do not care what it looks like with out you ...

Not legal in the USA, for the same reason that the "voyager" "insta trike" and others are not legal. All states and federal law define a motorcycle as...

Off setting your trailer tow bar moves the mass of the trailer to the left more which while you are still pulling further over to the right, the mass ...

As pretty much every sidecar that has brakes ties the brake to the swing arm. The brake will not cause the sidecar to rise or drop noticeably at all. ...

All pricing has not been set as of yet. Base price is $895 The main frame section is 20 X 40 inches however we can also customize to different specifi...

They all tend to be to stiff however if you go with UCF America they have a very light duty unit that can be purchased where the swing arm is attached...

Looks like a Velorex frame clamp, Motovation frame clamps, one of our frame clamps and one piece of flat steel bent around the frame. In general frame...

Not sure the sure on the bearing number as we seldom do these any longer, It has been perhaps 15 years since the last one as I try not to work with Ve...

You can find information on all S/tep (sidecar trike education program) at this link The book "Driving a sidecar outfit also has good information whi...

Go with a 20mm axle. There is a bearing that you can change out that will work at 20mm. You will need to change the spacer between the bearings. You c...

The trailer tows best off of the center of the bike, but as you have figured out you end up with a rig that is way to wide. The more you move the trai...