Don't recall ever seeing one in person. Looks like a good candidate for a flip front conversion.

Jon wrote: >> Lexan/plexiglass will split similarly to glass if stressed at the edge or inside a hole. << Just to clear the air i...

I also usually use a jigsaw (sabresaw) and, yes, some melting happens but it is in the cut and not a real issue. Sometimes you can run the blade in on...

Carl, Thanks for the complimant on our Freedom Cruiser:-) The pics on the site are of our prototype and we technically have not 'gone live' wit...

A 562 velorex is typically listed as weighing 154 pounds.

I like to weld a triangular shaped plate over the whole connection once done. It must be put on in such a way as to still allow the clamping function ...

Moving the ball will make a difference in steering (trail). Raising the rear of th ebike will make a difference in static rake which also changes trai...

Do you feel a little 'trapped' ?

Tightening your steering head bearings will help alleviate the wobble you have. Sidecar rigs should run steering hard bearing tighter than solo bikes....

Go to sidestrider.com and contact Doug Bingham. I have built one but Doug has a lot of pictures etc. and will be surely be his very helpful self. Say ...

Ara, I read your blog and saw the pictures. I have already told you that I felt the connection failure may have bene aresult of your forst failu...

The late Jim Dodson did some for his and Chris' magazine years back.Go to Hack'd.com and look through the back issues lisitings or just call Chris at ...

I have welded some mounts onto bike frames but only fo rmy own stuff or if comeone wanted a real custom type system done up. Right now we are doing a ...

gnm109 wrote: snip.....I don't know anything about which other brands of sidecars might fit a Harley. ..............................................

Originally written by bikemike12 on 3/27/2007 11:17 PM I love motorcycles, but never tried a sidecar rig. Just got a Spirit Eagle sidecar "...