We've had them come in and helped load rigs on snowmobile trailers. Sometimes very hard to work with due to deck height. Lonnie

It would help to know which sidecar you have in mind for attachment. They don't all use the same mounting hardware. Lonnie

I've found the Harley "Buckhorn" bars are like rototiller bars, requiring elbow and lateral forearm muscle control. Being a long rider I find that t...

On my FLHX/Liberty rig i have the double banjo fitting connected to the rear brake master cylinder. Each brake then has it's separate line. Lonn...

If you look closely at the illustrations you will see the seat upholstery pattern and rubber floor mat are circa 1994. Floor carpet (not listed) has ...

None shown in my Velorex parts listings. I have used indoor/outdoor carpet remnants in the past.

. We have the replacement 3.25/3.50x16 Mitas tire for the Velorex models. $110.00 Lonnie Northwest Sidecars Boise, Idaho

If the road you are on is in good condition and posted for the 65mph speed you are traveling, nothing extra is required unless the rig is overloaded o...

Michael, With the Burgman or Silverwing the wife would need to be in the hack and son on the pillion for a better balanced rig. 3 up with baggage i...

Brian, You have a Jupiter sidecar. These are the predecessors of the Sputnik models. The front portion of the cockpit slides forward for eas...

Many use the quick disconnect fittings thinking they will never have to bleed the system. It doesn't always work that way. They may still allow a smal...

Quick disconnect fittings are easily available for this purpose. Lonnie

Depends upon what hack you are mounting. Here is a V-Max/563Tour rig we set up recently. Lonnie Northwest Sidecars Attached f...

Here's another 920 Virago/Velorex sub-frame. Lonnie Northwest Sidecars Attached files

The bias ply 5.00x16" tires will fit but the mileage is much shorter.