I've been on a lot of freight trains but I'm no Engineer either,in the strictest sense of the word. lol No doctor either but I've been in a lot of d...

Josh, A fork brace mount will work. Be aware that the VW dampers come in different stroke lengths from under 6" to over 7". If one is too sho...

Keep them within the KB parameters (by resizing) and post them on the Albums pages. Lonnie

Which Honda & which sidecar? Lonnie

Harley uses a mounting plate that bolts onto the back of the lower triple clamp (3 bolts) and replaces the clamshell deflector there for the rod end. ...

Hope you can find some real marine plywood to work with. My last marine (?) plywood buy had some unplugged blows that went through 5 of the 7 plys. ...

Looks like an OEM Velorex frame clamp ass'y. They incorporate a heavy frame shim for tubes up to approximately 1 and 1/4", or 2 shims for smaller t...

The voltage boost was a trick we used to do back in the 6V battery days to rev up the starter motors with a 12V battery. Worked fine as long as the l...

I think Peter Smith at Side Effects would be a good choice for you. Ph. (604)573-2364, fax (604)573-2365. Send him your trees and he will modify y...

Available vendors will depend on what cycle product you have. Some will modify your trees, some will have an exchange system and some will sell only...

Different mfg'rs tires have different dimensions and profiles. Or maybe a front tire is on the rear. They sometimes are narrowerin tread width. ...

The positioning puts it in harms way ground clearance wise though. Lonnie

A hydraulic proportioning valve should be used when connecting the two. Also be sure to use a master cylinder designed to operate dual front brake d...

1 1/2" or 2" x .120" wall square tube is a lot easier to work with. Lonnie