BMW Sidecar Belgium

That is absolutely awsome.A job well done.

A2

Thanks for posting the pics, your project looks very intriguing.
Best,
LL

it's done

Wow! Very nice work. Who made the bike frame? Why did you decide to use a custom frame and fork rather than use the stock "tele-lever" setup?

I made the frame my self and why i used 3 7X15 rims and they where out off the center,so imade the frame 2" offset for adjusting the front wheel to the center off the rear wheel.

And for the fork i want to change the wheel quickly now the 3 wheels are side mounted single side

Originally written by M@kke on 3/13/2009 4:46 AM

I made the frame my self and why i used 3 7X15 rims and they where out off the center,so imade the frame 2" offset for adjusting the front wheel to the center off the rear wheel.

And for the fork i want to change the wheel quickly now the 3 wheels are side mounted single side

My friend, you are indeed quite a craftsman. My compliments to you on a fine job.

You do some very nice work!!! Thanks so much for sharing. It's nice to be able to see what other craftsmen are doing.

WesP

Could you share a photo of the rear wheel adapter? I am specifically interested in whether you used steel or aluminum for your adapter.

Thanks,

Mike Lydon

i used aluminium for the wheel adapter 7020 5.12" wide

i hope you have something with this information