Jay, on the BMW's, I assume you meant CAN bus. Just wanted to clarify so others wouldn't be confused. floridasidecarproducts.com used to list a ...
Jay, do you mean an add-on rubber/plastic sort of thing? I don't recall seeing anything like that on a sidecar.
That's good tip Jay. I don't know if I'd have thought to move the body instead of spacing the wheel. I assume the tire rubs on the inside and you mo...
@davids - That's good to know. I suspected that a 155/80R13 would fit OK, but now we have proof.
@davids - According to a tire size calculator I have, a 155/80R13 should be about .4" wider section width and .6" taller overall diameter. ...
@ WinginCamera - Am I missing something? I'm not seeing any wheels at your Tire Factory link, just tires.
There's almost no options in 13" tires that are narrow enough to fit the stock rim. If you find a 60 or 70 series that fits, LMK. A 145/80R13 is...
@razorface I have no idea, but I wouldn't be surprised if all the CSC rigs are built on the same or similar frames. Does your wheel mount with whe...
Daryl Martel - 12/22/2011 3:39 PMI'm attaching a good crisp pic of the back of the wheel hub assembly. I don't see where a rotor would attach - am I...
@dwitgoldwing Make sure that there is enough clearance for the tilt/pivot mechanism. My FS l has the hole in the frame for the actuator mount, but ...
@Daryl Martel Unless there is a problem with your existing hub, it doesn't look like need a new one. From what I can see in your pictures, your hub ...
dwitgoldwing - 11/15/2011 8:31 AM My brake rotor is warped so I hope I can find a comparable rotor. Jay didn't mention it but DMC can supp...
Since I'm a amputee, pushing the pedal isn't an option so I will have to tie into the lever. I'll have to source a MC with a larger bore so that it m...
Since I'm a double amputee, I will have to tap into the brake lever. That will require a bigger master cylinder to move enough fluid to make it all w...
I have the bracket modified to where I think it is going to work. But to weld it on, it would be easier/better if the control arm were off the frame....