Yep, have lots of them and that is what I am using for that bolt at the moment.  

Well my goal was to try and make it follow the same lines as the frame in the area of the side cover, but at the same time be meaty enough to not flex...

I did give thought to that...But my SC with its electric camber control drive mechanism sort of dictates just how high the rear upper mount can go, an...

While the fresh paint was curing before final buff, I got back on some mechanics of the rig. My original top rear bracket mount I never liked, so I ca...

I have only been an active member here for about a month. It has been doing it since I first started posting...Its an ok feature that SOME forums have...

For the floor, at 1st I was planning to use bedliner but then changed my mind. I did use color matched bedliner on the front and sides of the lower tu...

Super hot summer here, slow go but all painting is now done. Time to start polish work then start assembling the package.  

I mostly now for over 20 years have sprayed base/clear Urethane. But on rare occasion will still do an acrylic enamel or lacquer based if the color I ...

If you want it to last a very long time, rattle cans just wont cut it....MV frame is basic black, but still not rattle can. I learned to autobody grad...

  I always liked the Wineberry that Honda offered back in the late 70's-80's but wanted something a bit different. This is called "Sparkling Me...

A small taste of the finished package vision.

  Very nice.....Lester mags, corbin gunfighter and a very nicely done Terraplane.....Hope ya didnt ride it nekkid!  

Lets talk about your gas pistons first. That is actually a very easy to solve problem. Sir Isaac Newton doesn't have much to do with it. If you kn...

As good a time as any to show all the details of the tilt frame I created. I had to have a place to store the tub top as I continue painting other bi...

@aceinsav I used about 30' of the 1" sq tubing and it weighs 2.2 lbs per foot so that is an easy 60lbs extra. added hardware and tidbits maybe anot...