Lots of ways to add a brake, On the cool cycles bikes we designed www.coolcyclesicecream.com we used a pull handle that twists to lock to apply the si...
A snow flake wheel on the sidecar is not going to work with out a fender change as it is to tall to fit under the stock fender. The front wheel on you...
None of this makes any sense at all. I have ran both the spoke wheel and snow flake wheel on my own air head bikes and even have ran the snow flake wh...
Tom Ridyard is in your area. He can help you. Jay G DMC sidecars www.dmcsidecars.com jay@dmcsidecars.com
Should you deciede to buy the sub frame of course we make it. Our kit not only gives you the lower mounts like in the photo posted but also gives you ...
We have not done an R1100R this way. On some bikes we run the vent line from the main tank to the supply line on the aux tank. This must have a check ...
On the 1983 GL1100A that I put 150K on with a sidecar I ran a Metzler K block tire on teh front. This is a flat profile tire made for sidecar use. It ...
One of my employee's worked at California sidecars and says that yes, they are a VW part. Jay G DMC sidecars www.dmcsidecars.com 866-638-1793
The V star 650 will be a good match for this sidecar, My office manager has one of our Kenna sidecars on her V 650 as such we have developed bike spec...
On my GL1500 rig I ran Automatic transmission fluid. Worked well. Jay G DMC sidecars www.dmcsidecars.com 866-638-1793
There are none that I know of that are worth trying. Jay G DMC sidecars 866-638-1793 jay@dmcsidecars.com
For us to do it we would need either the bike its for or one just like it into the shop. I see no problems in making mounts once we have a bike. Jay...
We have not done one yet, but I see no reason why we could not. Jay G DMC sidecars www.dmcsidecars.com 866-638-1793
On BMW's I have found that evey one seems to think that what ever brand of shock they like is the best. It is like the questoin "which oil is best" ev...
We call these "leading legs" and make them for a few bikes, mainly bikes where there is not enough room in the fairing for a angle change on the forks...