It should do well. I had been comunicating with a guy in Arkansas who is also doing a hardtail rig based on an XS650. His is a weld on with A 2" stret...

>>I have thought about running the wires through a tube. But it will have to be a bit bigger to hold everything. I'll come up with something tha...

Lonnie is right. The Velorex without extensive modifications is not suitable for such a large bike. Note that Lonnie (North West Sidecar) has probably...

Good on the use of the mity vac. They work well and are not very expensive. If you get the plastic one do not overdo it when pumping it up as you can ...

Originally written by Wngnut on 3/8/2009 6:15 PM I made a quick stand for the bottom mount bar out of some scrap metal. This will let me keep th...

I will jump into this I suppose. We do car wheel conversions for various bikes that run a single sided swingarm. Typically BMWs. We do not do a...

Looks great. Like the rack on the back of the bike too !

There is some good sidecar info in Hal's books which are here at sidecar.com as a free download. Click on the link in my signature below. Oh, and y...

We usually go with a minimum of 48" track width. 1 1/4" x .120 DOM may be okay but I would probably go with 1 1/2" or 1 3/4". We...

Originally written by bill_powell on 3/2/2009 12:07 AM broncorckcrwlr, where are you located? I'm In Dover, TN, about an hour (give or take) sou...

Originally written by RedMenace on 2/28/2009 1:58 PM That is gorgeous! You must bring that up to Hood River to show off! Hint: Don't foll...

B E A U T I F U L ! ! ! ! !

It can be true that a bad looking weld is okay as well as a good looking weld being bad. Hope yours are okay. I would have added more support via a...

Originally written by SidecarMike on 2/25/2009 8:41 PM Originally written by j_vger on 2/24/2009 6:04 AM Anyone have any experience riding...

Lonnie wrote: >>A late OEM stock Velorex shock or one of the same approximate length and travel will suffice. << My camera is wack...