twobearbill - 5/5/2010 7:13 PM The track width right now is 54 inches. Seems like a lot of space between the bike and the sidecar, but this is ...

What is the track width with the stock j bar in place. The 562 is pretty light. You may end up liking the added width for stability. Lengthening the...

M C - 5/1/2010 2:56 PM Hello Claude and thank you for your reply. Are you saying that the 1018 would be safe to use for a 1" axle? There is NO w...

Got a Picture maybe??

If you plan to weld it in use the C.R.. If no welding is to take place any of the choices will be okay for a 1" or larger axle if built right.

To put harley wheels on a sidecar we do a conversion to allow 1" ID tapered roller bearings on a 1" custom made axle. It works quite well and takes aw...

brockoli - 5/1/2010 2:15 AM just a note... the stock BMW engine was gutted, cases sealed and it was used as the fuel tank. That's a sure fire wa...

Just take your hands off the bars an dlet the front end 'wave' for you.

First off don't attempt to bend plexiglass. It is an acrilic and not the best for building your own wionshield. Source soem LEXAN which is a polycarbo...

Duane are you still out there? We didn't mean to come across wrong here and scare you off. Talk to us.

scrinch - 4/18/2010 7:13 AM Thanks Claud for the clarification. I was beginning to wonder If I was way off the mark somehow but knew my Libert...

Storch, If you have your brake setup how you like it and you know what it can and cannot do under various conditions then just ride the thing and ...

I am not huge on sidecar brakes in most cases but we have done quite a few setups with them. The large sidecars on wings and such do well with them. T...

Well heck if you are ever near central Pa be sure and give me a call and stop by. I am from florida and moved to Pa. Just found this: