Shadow1100T - 5/15/2010 10:32 AM OK,,,but what is hooked to it and why, there's even holes for adjustment. The ROUND tube running across the s...

The sidecar frame may appear to be hooked to the swingarm but it is not 🙂

Hack'n - 4/25/2010 10:30 PM If it has no shock it is a torsional suspension. The older CSC cars used this. The Eagles used a tubular coil over...

I woulkd say that a VW damper may be your solution if cost is a concern. If setup properly there shoudl not be that much effort to move it yet it will...

Hack'n - 5/11/2010 9:51 AM You must have a tall bike Ted! lol Metal or Sch.80 PVC fork spring spacers about 1" or so thick will bring you back...

LMO, By all means call Doug.He ain't much for email and such usually. He will run up your phone bill though ..lol. Say hello from Claude

Hack'n - 5/6/2010 10:48 AM To lengthen the struts I cut near the lower end add a proper length of tube the strut ends will slip into an inch or ...

twobearbill - 5/5/2010 7:13 PM The track width right now is 54 inches. Seems like a lot of space between the bike and the sidecar, but this is ...

What is the track width with the stock j bar in place. The 562 is pretty light. You may end up liking the added width for stability. Lengthening the...

M C - 5/1/2010 2:56 PM Hello Claude and thank you for your reply. Are you saying that the 1018 would be safe to use for a 1" axle? There is NO w...

Got a Picture maybe??

If you plan to weld it in use the C.R.. If no welding is to take place any of the choices will be okay for a 1" or larger axle if built right.

To put harley wheels on a sidecar we do a conversion to allow 1" ID tapered roller bearings on a 1" custom made axle. It works quite well and takes aw...

brockoli - 5/1/2010 2:15 AM just a note... the stock BMW engine was gutted, cases sealed and it was used as the fuel tank. That's a sure fire wa...

Just take your hands off the bars an dlet the front end 'wave' for you.