I have made a little more progress, I got the spoiler back together and hit it with some paint. I still have to finish the base where it attaches to t...

Remember the one at the Sidecars in the smokies rally, it is the first picture you posted about the rally I spoke with the owner of that rig for a w...

I know it sounds counter intuitive but you avoid lifting or flying the car by learning how to lift the car. it is critical for you to learn how to lif...

for me I have found that on right turns I go in wide and drop down then throttle out just like I did on 2 wheels in most cases. once you get comfortab...

OK so now I'm working on 2 things, I'm working on the rear taillight/ er and now I decided after having it on the car and seeing it daily that I am go...

here are a few pictures, showing the taillight housings and after I cut them down to fit, then the rear part of the refractor lens I had to mold to th...

I have been struggling with getting lights that will work because it is such a narrow area to work with now that I had to cut the backs of the lights ...

so here are a couple pictures, I shot a little primer on it and bolted it to the car. I still have to work on the center light bar a little and make a...

hmm never thought of that, strange it would pull part of a word out of a different word By the way, your work is excellent! Thanks, I don't ...

OK I don't know why but I have tried to edit my post 3 times and it keeps removing part of the word b.u.m.per and I don't know why, even in this post ...

Very impressive work. I look forward to seeing the finished tub. are you going to glass it

OK I have been working on the rear er/ lights pretty much every day, I just get to work on it a little in the mornings before work and a little at lun...

well a couple more little cuts and I made the first test fit of all the parts, so now I will get all the parts bonded together and into one piece. the...

I have been working on the rear of the car a little. I removed the er/ light bar and the mud flap I had made so I could start the sizing/fitting of th...