Skip to content
AceinSav
@aceinsav
Moderator
Joined: December 12, 2013 6:36 am
Last seen: October 6, 2025 6:43 am
Topics: 41 / Replies: 778
Reply
RE: Interchangable Sidecars?

oldschool just a thought but since you will be building from scratch why not make a couple minor mods and make the ramp slide in under the car when ...

8 years ago
Reply
RE: Steering damper sucess

Welcome if you have a wobble above 25 or 30 you need to look into the alignment of your rig. I would suggest at the very least go through the steps ...

8 years ago
Reply
RE: florida.

Rich As we are planning to go to both, Sidecars in the Smokies and the national rally I am keeping an eye on your plans as we would like to join you...

8 years ago
Reply
RE: First Recreational Drive

sounds like you had a great maiden voyage on your new rig. all of the mis-steps you mentioned are minor and easy to overcome

8 years ago
Reply
RE: Slug spacers in front forks, Goldwing

low oil in the forks will make it soft and bottom out and can even make it snap back up and hit on the rebound, that would be almost a sharp snap feel...

8 years ago
Reply
RE: The transformation begins

I have made a little more progress, I got the spoiler back together and hit it with some paint. I still have to finish the base where it attaches to t...

8 years ago
Reply
RE: Indian Roadmaster as a tug, any experience or thoughts?

Remember the one at the Sidecars in the smokies rally, it is the first picture you posted about the rally I spoke with the owner of that rig for a w...

8 years ago
Reply
RE: Sidecar turns

I know it sounds counter intuitive but you avoid lifting or flying the car by learning how to lift the car. it is critical for you to learn how to lif...

8 years ago
Reply
RE: Sidecar turns

for me I have found that on right turns I go in wide and drop down then throttle out just like I did on 2 wheels in most cases. once you get comfortab...

8 years ago
Topic
8 years ago
Replies: 4
Views: 182
Reply
RE: The transformation begins

OK so now I'm working on 2 things, I'm working on the rear taillight/ er and now I decided after having it on the car and seeing it daily that I am go...

8 years ago
Reply
RE: The transformation begins

here are a few pictures, showing the taillight housings and after I cut them down to fit, then the rear part of the refractor lens I had to mold to th...

8 years ago
Reply
RE: The transformation begins

I have been struggling with getting lights that will work because it is such a narrow area to work with now that I had to cut the backs of the lights ...

8 years ago
Reply
RE: The transformation begins

so here are a couple pictures, I shot a little primer on it and bolted it to the car. I still have to work on the center light bar a little and make a...

8 years ago
Reply
RE: The transformation begins

hmm never thought of that, strange it would pull part of a word out of a different word By the way, your work is excellent! Thanks, I don't ...

8 years ago
Page 36 / 55