Last seen: January 11, 2025 2:44 pm
Hi Spudy It was good to meet you in Coeur d'Alene. I seldom get down through Helena and then it seems I'm in a hurry to get someplace. One time a ...
I rode my Gold Wing the other year when I had the chair off to replace the rear tire. I wouldn't recommend riding it that way. As has been said you ha...
Hi Tom, so sorry to hear about Henry but it looks like you've got a real "Buddy" there in Pete. We'll be eager to meet him. Ralph and Peggy
I have a GL1500/Champion Escort and have E-Z Steer, I think 6 degree. I have similar steering as Mike. It is so quick to react especially at freeway s...
With our Gold Wing 1500/Champion Escort last summer towing the 600 lb. camper and wife, little dog in sidecar we pulled onto I-5 in Washington headed ...
Mine has a label like Lloyd's. The serial no. is 01677. I was under the impression it was about a 1996 but I'm the 2nd owner. The trunk lid hinges are...
Billy Bob 169 I think with the wider tire and taller, I was running the tilt pretty low and then with a passenger it rubbed more than usual. Later, ...
On my Champion Escort, I couldn't find a 145 so put on a 155. After about 2,000 miles I happened to look on the inside and there was a quarter inch gr...
I bought an old Harley panhead 1951 74 in the year 1959 for $650. It was attached to a steel Harley sidecar and at the time wasn't too impressed with ...
Hi Tom. He's a great looking pup! We are anxious to meet him and see you again. Probably next summer. I think our Mindy will like him too. Here's an i...
Tom, we are so sorry to hear about the passing of Archie. I'm glad we got to share in his last ride together from John Day. Ralph, Peggy and Mindy
Hi Will. The hub on my Escort is the same as a trailer 4 bolt hub. I don't have a rotor on my rig but a friend gave me a pair of hubs with rotors from...
Yes, Lonnie it is scrubbing from left to right. Not a lot but when you run your hand over it you can notice it. The very inside strip of tread is worn...
Shadow, you gave me an idea. Maybe I could cut the bolts off and use thinner nuts that would miss the swingarm or maybe come through from the back sid...