There is a size limitation on photo submittals. If too many KB's resize them or paste from another utility like Photoshop. L.

No reason you can't do this. If you find a compatible body. just be sure the chassis/body combo is large enough and suspension sturdy enough to supp...

Great looking sidecars, well built, love the classic styling. Entry and exit aren't the easiest. 17" wide seat as I recall. Judy says the seat was...

Heating the slip tube and rapping it with a hammer after a good soaking with penetrating oil works. Best to do this frame off though to prevent body...

or Dauntless Motors.com

I've seen them sized from 12mm to 3/4". I've made them and bought some from Perry's & DMC. Lonnie

I've had zero (0) problems with the Harleys with 5 degree trees. They also work fine without a damper. Perhaps the GL's have a different frame neck...

With no ballast, absolutely! L.

On the bike end it appears to have the old style ball and collet lower mounts and clevis and eyebolt for strut mounts . DMC has frame clamps for both...

Here are some options for mounting the front U-clamp assembly. L. Attached files

I avoid using the rear and connected sidecar brake for normal stops, depending on the gearbox, engine braking and the front (2) discs for this duty. ...

20010 FLHX with Liberty Classic. I have what I want. L.

The Liberator sidecars had a steerable (turning) sidecar wheel but many had problems with it. There were lawsuits about the problems in the past. I ...

If you have lean-out on the bike you will experience this feeling for a bit even going straight until you get used to the rig. You are used to bankin...

The Honda airbags don't help either if you're upside down. lol L.