A less restricted exhaust will expel heat more readily than a restricted one. Your catalytic convertor already restricts the exhaust and causes higher...

It will alter your front end height a certain amount unless you have added spacers to compensate. A minor loss of ground clearance but probably not ...

No way this setup is viable for a safe trip. Jay makes KLR mount sets and can probably give the owner or re-installer of his choice technical advis...

I have two of the conversions in stock. Lonnie

I paid $532. freight charge last fall for a DMC Tomahawk delivered to Boise, ID. Lonnie

Harley sidecars are made to fit Electra Glide frames only without major expensive mounting modifications. Even then the mounting systems were varied (...

The Friendship with a bit of ballast would work fine with both of these choices. Don't try to attach any early Velorex to the Aspencade. The GL100...

This panel is reinforcement that helps hold the contour of the body. If removed it will crack, probably in more than one place, Unless the remaining...

I tried Windows 10 for a few days and was glad to revert back to Windows 7. Lonnie

Good match for the Hannigan. Lonnie

Try again, it took some time to upload the pix. Lonnie

A few years back I purchased a Triumph TBird sub-frame from my friend Doug Bingham. He was the only vendor at the time that had a Triumph sub-frame f...

What is your choice for a tug? Lonnie

They are no longer from Velorex. The only ones available are for the post 2004 models and they come without the spring. Try Progressive Suspension,...

Where are you? Drop me an email at nwsidecar@aol.com. Stating what bike it's going on and what you have for mounts and pix. Lonnie Northwest...