Judy and I have used the Kickback 24 riding goggles with 24 hour transforming lenses. UV activated, they transform from almost clear to smoked automat...

Place ballast to the rear and outside as much as possible for right turn stability and to keep the sidecar from dipping it's nose into the sand during...

Under albums, Name your album, then click upload photos. Browse till you find what you wish to upload and enter it. The photos must be previously r...

I posted an answer yesterday but apparently it got lost in transit. Through the years Harley sidecars have been mounted on Harleys with 8" to 8 1...

I have mounted a few in the past for owners of kick only bikes but not many. Lonnie NWSC

The sidecar wheel lead is 8". Lonnie NWSC

They could stand to be beefier. Not much steel left after it's bored. Lonnie NWSC

What make is the sidecar? Can't tell if it is too small. 1- The low speed nose wiggle is the nature of sidecar rigs. A damper would control this...

I have new frame U-clamp ass'ys and a complete long strut with Eye bolt. Lonnie nwsidecar@aol.com

Either one might bring fifteen hundred.

2005 was the changeover year for the suspension. Most all of the 2005 models had upgraded suspension designed to support later model cruiser bikes. ...

If you are going to buy a URAL, a Tourist (single wheel drive) model will better fit your commuting needs. They will cruise at a higher speed than th...

I would forget what the manual says regarding lean-in. 1 degree lean-out works better. Lonnie NWSC

As the saying goes: Been there, done that. Lonnie NWSC

Looks like you will need a thin walled socket for this one. Lonnie NWSC