Skip to content
Hack__n
@Hack__n
Famed Member
Joined: June 14, 2003 4:09 am
Topics: 58 / Replies: 4632
Reply
RE: need bike and sidecar info

A small bike would not serve your touring desires well as a couple. I'd look at 1100cc's or larger. Most pre '83 models are usually quite reasonably...

20 years ago
Reply
RE: double banjo bolt and crush washers

Did you try NAPA? Or a Harley dealer?

20 years ago
Reply
RE: questions about finding the correct sidecar

No Harley bashing, but what is this electronic "Rollover Protection" you speak of? It's not the tilt switch that retards the spark or kills the engi...

20 years ago
Reply
RE: Seat belt

A 3 year old should be in an approved car seat strapped in by an approved DOT belt. Lonnie

20 years ago
Reply
RE: Spirit eagle sidecar

Apparently Bruce's rig didn't "fold up " on him and he had it for 26 years. I know of the Spirit's being ran with FLH Harley's and earlier GL's and ...

20 years ago
Reply
RE: Short windshield

It's easy to use flat 1/8" stock for the Velorex 562 & 563 models with the lower mouldings. Why chop up a $100.00 + windshield instead? I use ...

20 years ago
Reply
RE: What years will Harley sidecar fit?

There were frame changes on the bike between the two years due to engine and drive changes from the old Evo 5 speed to the present configuration. Th...

20 years ago
Forum
Reply
RE: ballast question

The earlier models of 562S and 562E weigh 154# empty. Remember, part of that weight is resting on the motorcycle. Email me at: nwsidecar@aol.com. ...

20 years ago
Reply
RE: Help. I am trying to ID a small unknown sidecar.

Mark, This looks like it could be an early California Sidekick if it has torsional suspension. They were an 85# sidecar designed for use on motor ...

20 years ago
Reply
RE: ballast question

Whichever way you go with ballast: Place it low to the rear and outboard as much as possible for best handling. Placing weight in the front will make...

20 years ago
Reply
RE: IT IS COMING....

Too bad you're so far away. I have two new nice black foam seatbacks in the shop. Also have a nice Kerry rack and spare mount with luggage rack to...

20 years ago
Reply
RE: Sidecar to Motorcycle Front Upper Mount?

Usually the right side engine guard is removed since it's function is it save the cases from damage if the bike is dropped. This shouldn't be a probl...

20 years ago
Topic
Replies: 8
Views: 1214
Reply
RE: Wheel bearings on GL1100

John, If you offered him a free repair before subsequent damage was done and he refused, It sounds to me like a case of "You bought it, you got it"....

20 years ago
Reply
RE: I am getting a sidecar!

The dust seals on the wheel and swing-arm are felt seals with a steel retaining cup. Old technology but if lubed they last, and last, and ....... Mo...

20 years ago
Page 238 / 313