Harley-Davidson Customer Service 3700 W. Juneau Avenue Milwaukee, WI 53208 To speak with a Harley-Davidson customer service representative ca...
Check with Radio Shack.
Steven, I happen to be a Velorex dealer and have quite a bit of information on this conversion. E-mail me at: nwsidecar@aol.com or call (208)62...
Bob wrote: "It looks to me that if you accidentally fly the chair at the wrong time and place, or you brake or apply throttle inappropriately, you'r...
Claude, I'm aware of what you meant but I was just trying to clarify it for the less experienced readers. Lonnie (I don't make miskates!)
Claude writes: "The effort involved will be less with a lower final drive ratio no matter what method is used to obtain it." Actually a higher fi...
Many of the older Beemers are used here for dual sport and off road work. Like any other vehicle used off the pavement, many are highly modified whi...
Back when sidecars were in vogue for the Harley FL's (74 CI) the engine sprocket was 24 teeth for the solo bikes and 22 for the sidecar rigs. The EL...
Doc, You are needing a higher (numerical) gear ratio to eliminate lugging. On the Harleys you can go to a smaller motor sprocket, a smaller transm...
I think the sidecar ride depends more on suspension stiffness and tire pressure than wheel size. With a larger diameter wheel one could increase the ...
The best fix is to raise the gear ratio. If you're chain driven you can use a larger rear or smaller front sprocket. Otherwise an optional gearset is ...
For the same price as many sidecars cost including mounting and sub-frames one can get a turnkey sidecar outfit complete with the motorcycle already s...
Fred, Your RoadKing will need a sub-frame to mount a sidecar since frame access is limited. Installing one will more or less negate the easy on an...
It had armrest cushions but no radio. Here's a shot showing the armrest pads and handgrips. Lonnie Attached files
My TLE with the chrome handgrips was on a a 95th Anniversary Special Road King model so that may have had a one year option on the grips. Lonnie