A mount set is available for the R1200C. Not being all that BMC savvy I don't know what the difference is between the two models. Sometimes it's jus...

The Harley car chassis, being usprung transfers more feedback from the sidecar than a sprung chassis, bumps and such. The sprung body rocks around s...

Buy a sack of sand and pick up two (or more) of the cheap carry bags with straps that all stores seem to be selling these days. Line the bag with pla...

If the pivot (lower attachment) points on the bike are not the same height and distance from the centerline of the bike there will be at least slight ...

Did you ever check out J&P Cycles' calipers for optional replacements? I've used GMA front calipers for replacements on several rigs in the past...

1" toe-in at 8' with no leanout equals about 1/2" at 8' with 1+ degrees of motorcycle lean-out. You'll get ess tire wear using mimimal toe-in. Toe in...

Toe in measurements are made as (?) inches of toe-in difference at (X) number of feet. Your described method doesn't address the length you were usi...

MEK, MIBK, MIAK And acetone also may be available from your local neighborhood Meth lab. lol.

Too strong a solution will take the chrome plating off of tools if left submersed too long. Lonnie

The Motorvation Spyder is a well built classic sidecar with british styling. Though quite compact they have been used for years on even large motorcy...

Apparently Hannigan has an ax to grind with DMC and since you've been dealing with Jay you are caught in the bight of the line. DMC and Velorex aren...

You can pull the lamp or if it is also a running light I have used electrical tape to block off the turn signal filiment. Lonnie

I have a complete New mount set with these numbers. Would consider selling just these parts. email: nwsidecar@aol.com or call: 208-629-8409...

There are three different lengths of clevis bolts that come with the sidecar and they can be moved around to where they fit best or shortened to fit. ...