Skip to content
using a caravan mov...
 
Notifications
Clear all

using a caravan mover as a reverse.

6 Posts
6 Users
0 Likes
19 Views
(@extreme10)
Posts: 16
Topic starter
 

Has anyone got any information on using a caravan mover as a reverse on either the side car wheel or the bike?

Just thinking of returning to a hack again after many years solo and a trike but now far to 'mature' to have the power to push a complete outfit out of a difficult situation. I also don't want to have to go down the road of a Goldwing or BMW LT. as I prefer a more naked bike.

I have found a number of units that just may cover what I need but would be interested in learning if any others have gone down that road.

 
Posted : September 21, 2016 10:26 am
(@claude-3563)
Posts: 2481
 

Have not been able to find a USA distributor for the caravan movers....but. great idea for sure. We have done reverse setups using a winch motor and they do work.

 
Posted : October 2, 2016 8:49 am
(@oldschool_iscool)
Posts: 468
 

I found one US distributor:

http://www.easi-move.com/

I had trouble internet searching for this device due to the different meanings of "caravan" between American English and English English.

 
Posted : October 3, 2016 3:47 am
 VLAD
(@vlad)
Posts: 440
 

Looks like not only caravan mover need to be install but at least 85Ah battery too.

 
Posted : October 3, 2016 5:40 am
(@al-olme)
Posts: 1711
 

I might be alone on this but doesn't this seem like overkill? Claude's starter motor friction drive, as it was fitted on Sarge's "Monster", was more simple, a fraction of the price and didn't require an upgraded electrical system. It really seems like we should be thinking about appropriate technology.

 
Posted : October 3, 2016 8:51 am
(@jaydmc)
Posts: 1795
 

We have done many different reverse set ups, years ago we tried a "caravan" mover, this one had a ball on it, lifted the front of the caravan (trailer in the USA) and moved it. The problem was that it is WAY TO SLOW!
Jay G
DMC sidecars
www.dmcsidecars.com
866-638-1793

 
Posted : October 4, 2016 5:45 am