Skip to content
Looking for Harley ...
 
Notifications
Clear all

Looking for Harley CLE rear mount

16 Posts
7 Users
0 Reactions
654 Views
 kmev
(@kmev)
Posts: 22
Eminent Member
Topic starter
 

I'm looking for a Harley CLE rear mount - the one that clamps to the sidecar frame. Alternatively, I know this mount is available as a reproduction from V-Twin, but they do not make or sell the u-bolts. If anyone has just the u-bolts, or knows where to find them, that would be very helpful, too.


 
Posted : December 10, 2014 4:21 pm
(@dawg-gone)
Posts: 78
Estimable Member
 

bought 2 from Fastenall in WA


 
Posted : December 13, 2014 6:04 am
 kmev
(@kmev)
Posts: 22
Eminent Member
Topic starter
 

I never actually thought about using off-the-shelf u-bolts. I thought the OEM bolts were somewhat flattened at the apex, but I guess any quality u-bolt would work just as well.


 
Posted : December 13, 2014 12:22 pm
(@IndSlim)
Posts: 93
Estimable Member
 

I just saw some in a catalogue not too long ago with the flattened apex. There is a name for them. I'll look. Grangier may be another source.


 
Posted : December 14, 2014 5:33 pm
(@jack-jr)
Posts: 3
New Member
 

Check your local HD parts man I got two just last month
they can order from the factory $36.05 each


 
Posted : January 4, 2015 3:22 pm
 kmev
(@kmev)
Posts: 22
Eminent Member
Topic starter
 

Those are awfully expensive u-bolts. Are they flattened at the apex?


 
Posted : January 5, 2015 4:30 pm
(@jack-jr)
Posts: 3
New Member
 

no just u bolts
1.5 " inside diameter
I could not find any at graingers or other suppliers that would fit the frame and the block.
so I paid H-D price, even the parts guy at the dealer thought the price was wrong, so he re checked and was
surprised .
I had to go to 2 dealers one only had 1 in stock the other they ordered for me.


 
Posted : January 7, 2015 2:02 am
(@roadglider)
Posts: 34
Trusted Member
 

Check on ebay. I'm pretty sure I've seen these u-bolts listed on there.


 
Posted : January 7, 2015 6:23 am
 kmev
(@kmev)
Posts: 22
Eminent Member
Topic starter
 

Looks like these should work at $7 each in stainless: http://www.fastenal.com/web/products/details/74635?searchMode=productSearch&filterByVendingMachine=

3/8"-16 bolt with 1.5" inside width, 2.5" inside length, 1.25" thread length.


 
Posted : January 12, 2015 1:40 pm
(@jack-jr)
Posts: 3
New Member
 

Looks good the only difference is the length of the thread area is 3/4 "on the HD bolt and the HD bolt uses a fine thread.
I just measured my u bolts. Im going to the Fastenal store to see if they fit into the mount.


 
Posted : January 13, 2015 6:27 am
 kmev
(@kmev)
Posts: 22
Eminent Member
Topic starter
 

I stopped at my local Fastenal store, but the guy at the counter would only sell me 5, not two. I could purchase two online and pick them up at the store, but he refused to sell me less than five of the 40 they had in stock. :o:-(


 
Posted : January 13, 2015 4:30 pm
(@Marine-By-Choice)
Posts: 19
Eminent Member
 

Some things just don't make sense.


 
Posted : January 13, 2015 9:08 pm
(@Hack__n)
Posts: 4720
Famed Member
 

I would buy the five. Just how expensive are they?
(you could use some of the money you are saving on gas lately.)

Lonnie


 
Posted : January 14, 2015 7:32 am
 kmev
(@kmev)
Posts: 22
Eminent Member
Topic starter
 

Hack'n - 1/14/2015 11:32 AM

I would buy the five. Just how expensive are they?
(you could use some of the money you are saving on gas lately.)

Lonnie

Its the principle of it all. I just ordered two online, shipped to my address. Total cost was eleven dollars less then that package of five.


 
Posted : January 15, 2015 4:16 pm
(@Hack__n)
Posts: 4720
Famed Member
 

If economically feasible we like to buy local if possible. Even here in Boise, where most parts and such are more expensive than when we operated on the 1-5 corridor where competition abounded
.
A symbiotic relationship exists with our neighboring vendors, as we both pay a bit more and buy each others products or services.

Lonnie & Judy Cook
(former owners, NWSC, LLC)


 
Posted : January 16, 2015 7:48 am
Page 1 / 2