Very sorry to hear. That will a hard one to deal with. Condolences to the family

Yeah, that's an early fender there.

You'll have to remove the fairing to get at the wires, there's only 4 screws on the back side and the 3 at the windshield to remove it . From there yo...

Nice!

Forget it if you have fuel injection. Otherwise it has to be mounted higher than the carb to flow

Crilly can you post a pic of it?

I would think that caliper is used on something else besides, I doubt they'd have only made that caliper just for the sidecar . If there is a way to t...

There was that yellow weather stip glue all over the place from years ago. I just took a corse sanding disk on a orbital sander, 40 and 80 grit and we...

Now the finished product

Once assembled It went on the bike for setup

Next were the cobbled up shackles. Replaced with new (still available from the MoCo) and I replaced the front mount bar, it too was added onto.

I made a new windshield from .100 Lexan. Used the old one for a pattern.

Here's the finished body.

Next the Black!

Did all the paint myself. I not a painter but I paint. Forced to keep the budget down because of what the bike itself was costing Prime...