Is there really any problem running in 4th gear? It was not all that long ago that bikes did not have a 5th gear. At times when I ran a GL1100 at alti...
Looking at photo's of similar bikes, I see no good place to use frame clamps at all on this bike. The rear tube location the tube is under sized and I...
Still need to know what bike, there may be better options then a frame clamp. Jay G DMC sidecars www.dmcsidecars.com 866-638-1793
Yes you would need a different wheel. We do make a 4 on 4 hub as well however I am not sure if the off set will work out on the CSC. We have not tried...
You did not say what bike you have, however in general if the clamps are placed such that they are not trying to resist a twisting motion they do not ...
Yes, you may not need a brake, until the one time that you do, I think it is foolish to not have a brake when it is possible and practical to have one...
Is your wheel straight on the sidecar? Is the tire round and balanced? Jay G DMC sidecars 866-638-1793
When California added brakes to these bikes the did so by welding a ring to the back of the brake hub. Do you have the ring? it will have 4 bolt holes...
I doubt that this rig will do 65mph on the bike it is now on other then at sea level, no head wind and on level ground. On the 800 it might however if...
Yes, Bingham M2II. It is a good match for this bike. I would take a close look at every thing on the sidecar mechanically. They were not always buil...
While we have not done one looking at photo's I would say that this is beyond most do it your self type's can do at home. We could of course mount a s...
Yes, it is a Roadster Royale. We can help you with mounting hardware, I believe Motovation still offers this sidecar so they should be able to help ...
I know of an expert Goldwing mechanic in Green bay who also is great with sidecars. Jay G DMC sidecars jay@dmcsidecars.com
When my wife Tara and I hosted the national rally in Washington state we hired a Blue Grass band. All but one person liked having Blue Grass at the ev...
With modified steering when you go into a corner you need to really pull the bars into the corner. Then once turning on a non modified bike if you kee...