Another thing that can help as you are asking about ride quality as much as steering. Changing your rear tire out to an automotive tire will make for ...
I have found that if you have your alignment correct and slightly over tighten the steering head bearings you do not need a damper. Dampers make your ...
As far as I know, white horse and DMC sidecars are the only companies stocking the book which is always spiral bound and all we have is the second edi...
Kelly blue book realistic values on bikes are often a bit low and always way off for sidecars. I assume what they do is take original price and then t...
The Velorex sidecar was designed for 350cc bikes, the importer seems to find safety of lesser importance then sales, in fact one of their dealers has ...
I would never consider putting a Velorex on an 1100 Suzuki. While I have never owned a Hannigan sidecar, I have owned several GL1500's with sidecars, ...
While we do not have any Velorex specific parts, we do offer proper bike specific NOT universal mounting hardware and are just up the road in Enumclaw...
I encourage you to take a S/tep class, while you may know how to work the controls sidecars are different, steering inputs are reversed from two wheel...
Bob's BMW is also set up as a dealer for our products and could put one of our sidecars on for you. We do have mounts of course for the GS having buil...
In very general broad terms, lower priced sidecars tend to be harder rubber and as such last longer and even if they do not last longer, at least the ...
All of our sidecars will work fine with the rocket some would require ballast but all are strong enough for ballast Jay G DMC sidecars
One of the reasons many people buy a Ural is that they can finance it and they figure that they can not finance a motorcycle sidecar combination. This...
It very well might be, they have used many. Jay G DMC sidecars 866-638-1793 www.dmcsidecars.com
Get the chrome acorn type lug nuts, thread is 1/2 inch 20 tpi. Any tire store should have them. Jay G DMC sidecars 866-638-1793
If memory serves, Harley says 1 degree of lean in, Harley does not have you pre-load the suspension before setting lean. Once you are seated on the bi...