Originally written by Hank41 on 8/1/2008 11:23 AM Back to the subject of sreering dampers, has anyone here experianced the phenomenon of over da...
Originally written by Hank41 on 7/29/2008 3:44 PM thanks folks the spring seems to be one of those harley things that work but the lord & ha...
Originally written by Hank41 on 7/29/2008 9:56 AM please allow me to join this discusion from the uk i have managed with much trial & error ...
Originally written by jsimon on 7/25/2008 11:23 AM yes I've done everything but just need the starting adjustments You need two long straig...
Originally written by Hack'n on 7/26/2008 11:12 AM Check the trail numbers. Most of the late '70's to present middleweight Japanese cruisers hav...
Originally written by Hack'n on 7/26/2008 12:07 PM Most of the Honda Cruisers have excessive trail and many need a damper when fitted with a hea...
Originally written by Shadow1100T on 7/26/2008 12:52 AM I would suggest that when installing a VW dampener that you think about which way you make ...
Originally written by Jim Van der Veen on 7/25/2008 5:15 PM Ok, HD or South America. My question is where do you find fittings for the piston e...
Originally written by Hack'n on 7/20/2008 10:56 AM I haven't checked the serial #'s on both shocks. I guess that would be a simple giveaway. I...
Originally written by Hack'n on 7/19/2008 2:49 PM If you also found the speed of extension and contraction at the same # of push and pull pressu...
Originally written by SidecarMike on 7/19/2008 12:50 PM Originally written by gnm109 on 7/19/2008 1:01 PM Originally written by Hack'n on ...
Originally written by Hack'n on 7/19/2008 10:37 AM All Evo and later Harleys with factory sidecars have the V-Dub style of damper installed. T...
I have a damper on my Harley rig. The damper is identical to the early VW Beetle. Harley apparently uses the same source. They are made in Brazil. The...
The passenger won't affect things very much. A high crowned road will be noticeable on a bike without an enectric lean device. It will want to pull of...
Originally written by MBHal on 7/12/2008 2:06 PM Success at last. I started fresh today, and worked from the front back, and it is on and drives...