The manual shows that the lower mount should have about 1-16" clearance from the regulator. If you use this as a starting point, the upper mount shoul...
Originally written by MBHal on 6/27/2008 8:25 PM Thanks very much for the info, it is a big help. Will I need to change anything to do with the ...
Originally written by MBHal on 6/27/2008 6:22 PM Hello, I need some help on Harley sidecars. Will a 1992 Harley sidecar, that is mounted to a 19...
Originally written by Hack'n on 6/6/2008 7:52 AM It seems to me that Richard Nixon was the man who first opened up our trade with Red China. I'...
So, the fact that China is now industrializing several billion people in the 21st century may be laid at the door of George Bush's father. I learn som...
The bolt appears to be 3/8" or 7/16". It appears to be too small. Perhaps a larger bolt in a grade 8 would suffice.
Photolinks don't work....
Kelly Blue Book says that a 1996 Goldwing SE would retail at $7,460. The Champion Escort would go at $1,265 for a 1996 or $3,600 or so if a 2007. The ...
Originally written by Hack'n on 6/2/2008 1:56 AM Out of balance condition will also cause cupping. Lonnie Good point. It would tend to...
Originally written by akathetroll on 6/1/2008 7:12 PM What would cause the front tire to have a cupping wear pattern? In my experience the ...
Does your sidecar have suspension on the sidecar wheel? I wonder if that is soft enough to cause a change in lean when the sidecar is loaded. Jus...
Originally written by gilberth on 5/23/2008 5:52 AM Gaylord, I took the MSF class a number of years ago and agree it's very worthwhile. But,...
Originally written by gilberth on 5/22/2008 4:19 PM The reason I'd like to have an M1 license (even though it's not required with a s/c) is to s...
Originally written by gilberth on 5/19/2008 4:12 PM I've been trying to rent or borrow a 250cc to take the M1 driving test on June 9. The prob...
Originally written by SidecarMike on 5/19/2008 3:52 PM Originally written by Uncle Ernie on 5/19/2008 4:24 PM I didn't put the above quest...