There is an FTE Automotive near Detroit, they may have supplied Harley out of that office. You might make some progress with a phone call to them 248-...

Claude Stanley is a highly regarded sidecar builder and installer about 150 miles from you in Middleburg, PA. You might want to call him if that's not...

I googled the part number 44243-98 which should be the kit you're looking for. The only thing that came up that looked promising was Latus Harley Davi...

There are a lot of Harley caliper rebuild kits for sale on ebay, but not sure you will find what you need. Just curious, why don't you want to go to t...

Have you checked that all your mounts are still tight? And tire pressure still good?

Looks really good, I was wondering about the inside of the sidecar, did you have carpet glue residue you had to remove? If so, how did you get it off?...

I had my Harley sidecar shipped from Florida to Michigan a couple of years ago. I went through JC motors as broker and the sidecar was transported by ...

The 2011 sidecar service manual will tell you what you need to know if those documents aren't enough. There should be several for sale on ebay. Good l...

Here is a later revision of the same document but I haven't gone through it to see what's different. Found it with a google search. Attac...

I forgot I had this one, it is information for the 09 installation. I found this just by googling TLE installation instructions I think. I don't know ...

Looks like a good project. Attached files

I can feel mine flexing on certain roads but it doesn't seem like it is moving very much. I would probably check all the bolts again, the front brace ...

It is the same guy who was somehow connected with Willem Boon in the Netherlands. I found a Harley accessory ballast weight for my sidecar from him th...

Sorry I forgot to mention this before but another good source for old parts I found is www.tomsnosparts.com He is in Ohio and has a lot of stuff for s...

I see the springs and straps on ebay now and then, they were used on the older model sidecars. I would like to dampen the bounce on my TLE sidecar but...