Does it look like this? I had this one on my 1996 side car, now sold. I think the weight was a 1995 part number. I think it should work on any single ...

I have used Keyboard Motorcycle Shipping twice to ship sidecars that were not attached to a motorcycle. They did a good job.

If I was looking for one, I think I would go to a local plastics shop. You may be able to get away with a flat piece of plastic since the shield is so...

The Bonneville/Dnepr combo looks very good. Nice job.

I bought one for my '96 TLE from an online dealer about 2 years ago. Don't know if you tried that route yet, it cost about $100 if I remember right. ...

If you haven't already done so, you should read some of the Ural threads on the advrider forum. There are a lot of opinions and experiences written th...

Yeah, there are a few interesting front end treatments on those bikes. DMC makes a trail reducer similar to that for Suzuki v-stroms and maybe other b...

I asked Liberty to sell me a frame to put my later model Harley tub on and they declined. There is an interesting website from Germany with a lot of d...

No weight in the tub.

Yes, it is the rear frame crossbar that should be level. There's no good way I know of to put a level on the wheel on the drum brake Harley sidecars s...

I have a Lak sidecar frame from the Netherlands. I have a Harley tub that bolts directly to the leaf spring crossbars same as it would to the standard...

The only thing you can do is loosen up the u-bolts and set screws on the rear mount and change the angle of that connector to level the sidecar (this ...

Looks good. That light looks like it will get you noticed too. Looks like a good combo of different vintage parts.

Is it also a 91 sidecar? If it is an older Harley sidecar, you will have to take the sidecar off to adjust the rod ends on the lower mounts. Newer Har...

Thanks, I got one from the ebay listing.