Bigbikerrick - 12/4/2009 8:47 PM Ok Lonnie, Gotcha! in that position, you get the most resistance from the damper, since you use up the most tr...
smokeynal - 12/4/2009 5:36 PM I have noticed on quite a few European rigs that the front forks seem to be of a heavier design and sport a very w...
Dang Hank I thought it was a BMW for years , even when you had the velorex on it. Wow..sorry biut that.
Hack'n - 11/23/2009 9:51 PM A good front drum brake will do the job nicely. I'm not pro sidecar brakes. Most of my rigs haven't had one. I u...
Good advice seen here. Bottom line is 'lean left to go left and lean right to go right'. That shoudl be followed by rechecking the toe in as on some r...
If all goes well We will be coming out with a new wheel conversion over the winter. This system should be available for almost any bike. There will be...
You can have issues if you try and charge a large and small battery at the same time. There should be a disconnect between the two batteries to allow ...
jfixit - 11/13/2009 4:17 AM Thanks for the responses, all good infirmation. An extended conversation with Bob Wark was also very helpful. I real...
Hack'n - 10/29/2009 3:46 PM Both have full suspension. Both have classic styling. Spyder isn't all that easy to enter or exit. Liberty is th...
Sidecar sales from those who I have spoken to and from what we see here at the shop are holding steady or even on the rise.
Hack'n - 10/19/2009 2:34 PM One of your Twin tire wear problems could be due to the fact that they are obsolete tires that could be several year...
We all proabably agree that the tire that usually gets the most rapid wear is the rear tire on an outfit. If fitting a car tire on the rear of a rig g...
Hippo Hands or equivalent are a plus for me.
timo482 - 10/13/2009 1:20 PM im running a radial car rear tire on my ultra - the rear has 10k on it and is not even half worn out but the s...
rudyr - 10/10/2009 1:08 PM My Triumph Bonneville America has a 15 " by about 5.5 "rear wheel. But now it has spooke wheels, but those gray bear...