Originally written by tokarz33 on 4/16/2006 12:40 PM As long as you have time and money, anything is possible. However, I am looking for so...

No doubt that a mounting system for the sidecar could be fabricated to accomodate the use of a kick starter.

rON, I think 'Joe' from MAINE is Mike Marston ...the Vicar's Toy Shop...good guy!

A twin engined tubo charged hyabusa rig with center hub steering and some big tires on it of course 🙂

I heard the same thing Jack.

Originally written by claude #3563 on 4/13/2006 6:26 PM ..and this is only a pet peve. It is best to measure off the wheels and not th etires. Tires...

Mike's question of 'how much' is a good one. Urals and Dneprs can be lowered a ton if desired through suspension mods and become really sharp looking ...

Vernon mentioned something that is often overlooked. That is recheckimg the toe in after any lean adjustments are made. To get a 'handle' on what a gi...

I think Vernon and Lonnie got it about right...heck ya need a little toe in and a little lean out..try it and if it pulls change the lean out and if i...

This is th every reason that lean or tilt adjustors are such a good thing to have. You can adjust for varying weight and conditions at will and take a...

Maybe it should be noted that the dampner is th eeasy part. The fabrication of the brakets to mount it PROPERLY so it works right through the full ran...

Either bike would work okay. The shadow would probably be my choice though. If the suspension on the 700 is in good shape you will be okay with it. It...

And if you want coarser tread grooving irons are still available for less than 100 bucks. Don't tule out studed tires either..where legal of course.

Lonnie pretty much said it all.

John, I am guessing you are refering to the sidecar wheel when you say 'outside wheel'. If so there surely may be a diference in spring rate. The...