Is 125cc going to be able to pull that hack?

Don't fly the chair on ice.

I love sidecar games at rallies. One of my favorites was at a uralfest in 2002. It was a drive by shooting course. The rig was piloted over a marke...

You might check with companies that sell electric wheelchairs and mobility scooters. Some of them have lifts. Maybe Pride mobility.

I made my own of my own design. An aluminum pin that is fastened on by a screw from the inside. The aluminum pin is about .4 inches in diameter and ...

Have one made for her that says, "I like drive by shooting". Around a small picture of a camera.

Probably a very good rig to teach her with.

You need a long nut. About 2 1/2 or 3 inches long that will take the heim joint at one end and a piece of threaded rod at the other. Or a heim jo...

For a rig as large and heavy as yours, I would have used 3/4 inch fine thread.

Quite a gathering, impressive.

That Indian rig is about as classic as it gets. Beautiful.

I don't remember much about the gasket. I just put the lexan in it and mounted it.

When I did my velorex, I bought a piece of with inch thick Lexan. It is tougher and more flexible than plexglass. hold the material in place and scri...

That's the stuff that gives sidecars a bad name. I don't know who the Tartaglia brothers are but if they use the hands on technique for communication...

That look like a good choice of roads.