Most of the Honda Cruisers have excessive trail and many need a damper when fitted with a heavier car to prevent headshake. Lonnie

According to the nomenclature: the CSC "Power Trak front is the only one that does not require fairing mods and uses longer fork tubes rather than ext...

I have adapted rod ends (heim joints) depending on the application. The stock fittings are swedged onto the piston rod. Lonnie Northwest Side...

It's not such a far out idea. A Bingham Mark II (now languishing at Big Twin BMW in Boise, ID) mounted to a K100 Turbo bike set a National drag reco...

No need to worry about breaking anything. The raked trees are to make it easier to steer the rig. Like power steering. Quite expensive but worth i...

Read the reprint of J.R. Ewing's "WONDERFUL, Wonderful, BRAKES" in the current (Summer 2008) issue of Hack'd Magazine. Lonnie

We just sold a perfect low mile loaded 1993 Aspencade/Escort rig with all the extras for $8,500.00. This 1988 rig doesn't sound like a cherry. ...

Do you leave your lower fairings on year around? Lonnie

$6K to 7K depending on options.

The Oyster Run (back when it was a run) was traditionally on the first weekend of October. After it turned into a street fair in Anacortes, WA it wa...

Hard (panic) braking in a left turn with 1, 2, or 3 braking wheels can make the rear end of the bike lift and cause the sidecar to dip it's nose in th...

Definitely a candidate for a one off sub-frame. A 562 Velorex would fit nicely though. Lonnie

I haven't checked the serial #'s on both shocks. I guess that would be a simple giveaway. I don't have any Harley shocks here at present. I pre...

Sandblasting an A36 steel frame may be thriftier than using a more expensive material. I use .120" wall square tube stock for most of my fabricating...

Got right side pix of it? Lonnie