I've used vented battery boxes with inexpensive vented batteries. Not all batteries are vented. I've never heard a complaint re: corrosion from any...

Amen! I also use #6 wire. The auto battery is also good ballast. Lonnie

I had good luck with my StreetGlide/Liberty rig with Liberty trees and the Harley 103CI upgrade. I have no experience with extended rockers on the sp...

We've shipped a lot using Uship with no bad feedback. Lonnie Northwest sidecars

Follow this link for some great sidecar racing clips. Lonnie

The 560 windshield is still in the parts book ($260.). The brackets are not. Lonnie

It is a Mark I Bingham, very few parts, if any are available from Velorex that would work with the Bingham Mark I since Doug only used the body mold a...

I've attached a 1"x7"x28" steel plate to the outer (wheel) side of early Velorex frames in the past. That's about 55#. Usually for use with a heavy ...

Sounds like you are comparing apples to apples. "raked" trees are offset X amount of degrees and can either be machined from billet, or reworked from...

The OEM Mitas 3.50/16 is designed for sidecar usage and offers stiffer sidewalls than most, if not all replacements. List price is $200. Lonnie

Slight loss in ground clearance, slight increase in braking, slightly quicker steering and probably longer life front tire. Lonnie

It isn't.

"Knucklehead drivers paying scant attention" sic. Make that "Bonehead" Knucklehead drivers have too much invested in their classic Harley rigs ...

The extra volume on the Harley feeds the Brembo sidecar brake not ABS. Lonnie

I have found that the recommended 6 degree lean-out makes the pilot feel as if he/she were sliding off the seat. About half of that has been OK thou...