Notifications
Clear all
Technical/Mechanical Discussion
2
Posts
2
Users
0
Likes
8
Views
bike does not pull either side 1/2 toein. 1 degree leanout. again this problem with shock tower not verticle with frame = sagging inward toward bike. aesthetically not pleasing from the rear looking towards front. im thinking of leveling the sidecar body by putting spacers ie soft rubber in between the frame support and body...anybody tried this ... thanks
Posted : March 27, 2008 6:41 pm
EBAK,
I have run across quite a few Velorex sidecars where the frame and suspension tower were not perpendicular to one another.
We have shimmed the body as you mentioned and have also fixed the shock tower in some cases. Shimming the body is pretty straight forward...go for it.
Posted : March 27, 2008 11:06 pm
