I recently picked up a used kenna sidecar on a BMW R100RT and the previous owner had moved the car in closer to the bike. Close enough that you have a great deal of trouble getting the right saddle bag off. I would like to set it back to the stock factory track width if somebody has an idea what that was. I've done lots of reading on this topic and 50 " seems to be a reasonable width, but it can vary a bit either side of this amount. Any thoughts on this bike & car combination. Thanks
There is no stock track width. You can set it where ever you like however if you go to wide handling suffers. We try never to exceed 80% of the wheel base of the bike. Normally we set these up as narrow as practical and still allowing for the saddle bag to come off.
Jay G
DMC sidecars
866-638-1793
www.dmcsidecars.com
Thanks Jay.
