formed steel u made out of a piece of 5/16" steel sheet....... i dont know... the projects i get into when she needs something.... to

all those 18's are rears - front 18's would be 18 x 3.5 dual flange 2003 and later 1' bearings.... used 16" 40 spoke wheels can be gotten...

i used to have to do this on my bikes in the 70's - but both of my twin cams have not yet lost any parts at all. to

?? make? model? version? electric? year? ?? to

getting the alignment right [toe in and lean] will take a bit of work on your part. the learning will take more than just a few mins. - however ajustm...

you get to run less lean and less toe in if you have a front end with very little trail - ie a raked tree or a swing arm front end. you also get less ...

everything you need is in the harley parts manual the real problem is if the parts man is in a hurry or unwilling to spend the time to learn how ...

and the WORST part is that i could have sold the stock one for about what the new one cost so it cost me even MORE since when i traded in the bik...

been there, tried that, it was a expensive total waste of time made a perfectly good part into landfill fodder... the proper one goes on from the FRON...

06, 07, 08 each have LOTS of changes - 06 all the wire changed, 07 the frame and engine and trans changed, along with some wire, 08 has tank, wire, fu...

ok, there we go - the first thing ive seen that will actually work on a twincam harley with a sidecar thanks to

i made a cardboard cutout of the filter adapter from a 110 and it wont clear the mounts and the cylinder - its designed to tilt forward a bit. the fil...

the hassle of a cooler is accessing the oil - there are no hoses any more so a filter adapter is needed - the one that comes on the 110's wont clear t...