Skip to content
sidehack411
@sidehack411
Active Member
Joined: December 21, 2014 9:44 pm
Topics: 1 / Replies: 7
Reply
RE: velorex 562 mounting on a 1997 883 sportster

Again, sorry for my lack of knowledge here, I'm not sure on the suspension. It says it is a 1991 model on the car. My wife (the usual passenger in ...

11 years ago
Reply
RE: velorex 562 mounting on a 1997 883 sportster

Thanks, Lonnie. I will try those fixes. Again thanks for the help, spring seems to be here and I do really want to get this rig out in the wind.

11 years ago
Reply
RE: velorex 562 mounting on a 1997 883 sportster

Hack'n, I have the car mounted, it sits level, left to right and front to back. I have the lean out set, and the tow in. The sidecar axle is 15 inch...

11 years ago
Reply
RE: velorex 562 mounting on a 1997 883 sportster

Thanks gentlemen for the continued advice. New question with the lower rear sliding clamp mounted as far back on the frame of the bike as possible wh...

11 years ago
Reply
RE: velorex 562 mounting on a 1997 883 sportster

Finally got around to getting the car mounted to the bike. When setting the toe in would I be better off with a board on its side clamped to the tire...

11 years ago
Reply
RE: velorex 562 mounting on a 1997 883 sportster

Lonnie, The bracket shown in the pictures just bolts on to the subframe which runs back to the exhaust? Any idea on the cost of such bracket? I...

11 years ago
Reply
RE: velorex 562 mounting on a 1997 883 sportster

Thank you gentlemen for the quick replies. After Christmas I hope to get out in the garage and start trying to get the car on the bike. I will probab...

11 years ago