Skip to content
jaydmc
@jaydmc
Noble Member
Joined: June 14, 2011 6:09 am
Topics: 73 / Replies: 1701
Reply
RE: R1200GSW

We just finished installation of our steering modifications for this bike and have made a batch for any one needing one. This is similar to what we ha...

13 years ago
Reply
RE: Could use some mounting advise please

We do not make a kit for this bike however some people have made due with our CB 750 mount set. You will want a sub frame for at least the lower rear ...

13 years ago
Reply
RE: Leading links & side at mounts

We also make a leading link for the K100LT Jay G DMC sidecars www.dmcsidecars.com 866-638-1793

13 years ago
Reply
RE: R1200GSW

We will be at the rally in Salem, We will have the R1200GSW with our current M72DX sidecar with every option on it. We also hope to have a sample of t...

13 years ago
Reply
RE: Sidecar Attachment Question

Your bike will work ok with out changing the front end. It will just steer hard. You can always change the front end out latter if you want. Jay G ...

13 years ago
Reply
RE: Wheel Spacer?

You should be running a 145 13 tire which is still a bit wide, you can also switch to a 12 inch wheel, This is a standard trailer bolt pattern this al...

13 years ago
Reply
RE: Sidecar Attachment Question

Earls is a specific brand / type of leading link front end. What bike you install a sidecar on all depends on just what you want to get out of it. T...

13 years ago
Reply
RE: Sidecar Attachment Question

You will need a proper sub frame for the bike, we make the sub frame, we also make a leading link front end for the bike. If this is an early Californ...

13 years ago
Reply
RE: Still consisderable work steering into corners

For lighter steering you need to reduce trail on the front of the bike. To reduce trail the front wheel needs to move forward by a couple of inches. W...

13 years ago
Reply
RE: Vetter Terraplane Upper Shock Mount

Yes it is. I would make sure that you can remove it. Never had one apart so I do not know how much work it is to remove. It is a bolt in part. Jay G...

13 years ago
Reply
RE: Vetter Terraplane Upper Shock Mount

The shock threads into a lug on the side of the frame. It has what looks like 1/2 20tpi threads. We do have one NOS unit in stock $75. This is most li...

13 years ago
Reply
RE: Hello all! new to the USCA and need some quick imput.

We often back up to a side walk or curb that way the angle on the ramp is not as bad. Jay G DMC sidecars 866-638-1793

13 years ago
Reply
RE: Vetter Terraplane Upper Shock Mount

I do not have the answer at this time, however as I still have some NOS roll bar assemblies stored at home, I will take a look tonight. BTW, I also ...

13 years ago
Reply
RE: New Guy Needs Help

More often then not we find that if your alignment is correct, you have no flex in your mounting system, your wheel lead is not to great and your fron...

13 years ago
Reply
RE: PULLING A TRAILER WITH A SIDECAR RIG

I built it that way. Jay G DMC sidecars 866-638-1793 www.dmcsidecars.com

13 years ago
Page 86 / 119