As far as I know, no one makes what you are looking for. We do make proper bike specific mounts for your bike however they are for modern 4 point moun...

We have spoken to several people who purchased sidecars and or bikes from this company. Usually we do not hear from people who have purchased elsewher...

Another bump to the top as it is important. Just got off the phone with a dealer who's customer had come in with an RK sidecar that he calls the bigge...

I do not remember the dimensions however we can help with the needed hardware. The Vetter ran a 3 point mount where the upper was adjustable on the fl...

I wanted to bump the back to the top. I just got off the phone with some one who spent a lot of time on the phone with saferwhole sale to make sure th...

Never heard of them. As one of the largest manufactures of sidecars in the USA we often provide mounting hardware for other brands of sidecars as s...

Roto Pax makes high quality canisters. I keep one in the "top" storage compartment of my MG as it has no fuel gauge. My office manager keeps one in t...

Your main issue is fitting a different wheel and tire under the fender. A bigger wheel and tire will not fit and you would also need to align the rig ...

Frame on all of the bike are good enough as long as proper sub frames are designed, pretty much the case with most modern bikes. The days of "clamping...

We have done perhaps 40 of the V strom but only one of the current generation of bikes and did not have time to tool for production. We have done abou...

We stock the pads, we will need to know if the pads are held in with one or two pins. If it is two pins then you have the old FO4 caliper which are no...

No recommendations for the rear, I like the Heidenau for the front. Avon also makes the sidecar triple duty in a 3.50 19 that would work on the front....

With proper bike specific mounts so no fabrication is needed most people can either install the sidecar on their own or have any one with some mechani...