Skip to content
jaydmc
@jaydmc
Noble Member
Joined: June 14, 2011 6:09 am
Topics: 73 / Replies: 1698
Reply
RE: Would this sidecar work for me?

We make the sub frames, the motovation would not be my first choice as there is a lack of ground clearence. We normaly go with our M72D or M72DX sidec...

15 years ago
Forum
Reply
RE: Tracking to the Right

When you set this up, Was the bikes suspention pre loaded to the ride height it is with you on the bike? I agree with Lonnie on the need for more lean...

15 years ago
Reply
RE: ?

We make bike specific mounts for the CB750A (the mounts are different then the CB750 mounts) they work out ok as sidecar bikes, a bit lacking on power...

15 years ago
Reply
RE: Sidecar frame mounted hitch maker

One thing to keep in mind, Not all companies carry the liabilty insurance for building trailer hitches this would include many sidecar companies. Ja...

15 years ago
Reply
RE: Champion Escort brakes

We would change it over to the current Brembo that both we and Champion uses. We can also if need be replace the brake rotor for you. One of the thing...

15 years ago
Reply
RE: Champion Escort brakes

The Calipar is a Brembo FO 4 Brembo no longer makes this. They sold the rights to another company years ago. It has been about 5 years since I tried t...

15 years ago
Reply
RE: The Dreaded Strap Clamp Slip!

Our mounting kit provides only the 4 attachment points for the bike, The non-oem mufflers should not be a problem at all. We also do make the bosses, ...

15 years ago
Reply
RE: Hitch for a Goldwing - tube or bike mounted?

We custom build most anything for bikes and sidecars and build far more trailer hitches then sidecars, We are way out of the way up in the Seattle are...

15 years ago
Reply
RE: The Dreaded Strap Clamp Slip!

In general frame clamps should only be used when possible such that they are not trying to resist a twisting motion. When ever possible it is much bet...

15 years ago
Reply
RE: Counterbalancing

I think Lonnie has a good idea, Bolt to the bottom of the rear section of the frame a floor, fill the space to the upper part of the frame with lead, ...

15 years ago
Reply
RE: Crazy idea? Intruder VS1400 and sputnik - swing/flex mount

The model before the Sputnik was the Jupiter, the nose on it slid. The trunk did not open from the out side on this sidecar, you had to remove the sea...

15 years ago
Reply
RE: Crazy idea? Intruder VS1400 and sputnik - swing/flex mount

If he has changed the wheel then he should not need to worry about the wheel bearings. Sputnik wheels were not all that high quality, I imported sever...

15 years ago
Reply
RE: Crazy idea? Intruder VS1400 and sputnik - swing/flex mount

The Sputnik stock wheel is kind of light duty for this bike, If the wheel still has the Russian wheel bearings, Change them out. The bike you have mou...

15 years ago
Reply
RE: taraplane by volerex

The terraplane was built by Vetter here in the USA. In its day it was one of the best sidecars on the market. Velorex on the other hand is / was an en...

15 years ago
Reply
RE: Another compatability Question Harley&California

We make bike specific bolt on mounts for your bike that will work with this sidecar, You will also need two eye bolts to adapt to our eye bolts and a ...

15 years ago
Page 117 / 119