The original springs on the Harley sidecar would work just fine. There would be no need to remove them. The Ural sidecar could mount directly onto the...

Originally written by timo482 on 10/24/2007 8:33 AM the reason i have not started at all is that i really do not like the idea of trying to put ...

Originally written by Dean in K.C. on 10/18/2007 8:24 PM I too have wondered how the ABS system could be integrated into the sidecar brake - wou...

Originally written by Dean in K.C. on 10/18/2007 5:31 PM I went with the FLHPI - or Road King model - because I can order my bike through the PD...

Originally written by Peter Pan on 10/16/2007 4:59 PM Jerry, I didn't look much but appearently there are too long levers and no reenforcement...

Originally written by JerryR on 10/14/2007 2:50 PM I repaired both of the current fractures earlier this week and added gussets to both. Fo...

Hi, The tubing looks to be rather a thin-wall section. A good welder should be able to reinforce the area that is breaking. I would remove t...

Originally written by timo482 on 10/12/2007 4:35 PM i used to have to do this on my bikes in the 70's - but both of my twin cams have not yet lo...

Originally written by Chain Gun on 10/8/2007 4:42 PM Thanks again for all of the replies. What do you believe to be the most problematic with th...

Originally written by timo482 on 10/7/2007 5:42 PM and the WORST part is that i could have sold the stock one for about what the new one cost ...

Originally written by ChopperDoug on 10/7/2007 2:02 PM Thanks for the info Timo482. I've took off and put on the lowers many times. Although the...

Originally written by Gildo78 on 10/3/2007 2:11 PM Sticks, I just got the book for the sidecar and it does say that you can flush the line ...

All of the above information on mounting a HD sidecar to an Ultra is essentially correct. The number for the manual is 99485-XX (XX is the last t...

Originally written by sidecarbrit on 9/29/2007 6:35 PM Well the sidecar body has been replaced and it looks good- so fingers crossed. They att...

Originally written by djcconcours on 9/28/2007 2:16 PM Sounds like you really know your bike. One day I will be brave enough to take on jobs lik...