If it is okay with you from an aesthetics standpoint the new larger tube does not have to run all the way to the end(s) of the older one. I assume you...
To lenghten a strut I would cut the one you have in half and then find a piece of tubing that has a I.D. close to the O.D of the exisitng tube. Cut th...
Bob wrote: >>SC tire no more than 25 ..soft..<< Oh well Bob I do just the opposite and run a lot of air in the sidecar tire. Alway...
Originally written by Hack'n on 5/20/2007 3:06 PM I only use a Pingel hand pump designed for front fork and air shock useage. 0 to 60# limit w...
Sounds liek you wil have a nice combination after you get it sorted out a little. You can play with air pressure some and see if it makes some diff...
Joyce wrote: >>The sidecar world is smaller than you think and some dealers also install other brands. I know Claude does. Best to call and a...
gnm109 WROTE: >>>My Harley rig has two 3/4 inch coarse thread bolts which hold the bottom two mounts of the sidecar frame in place.<<...
Much discussion on Ara's situation has taken place at SCT. If anyone wants to read it click on live link below, join yahoo if you are not a member a...
From your sentence >>Thank you for your reply. But we also need sales assistance<<< I suppose my sentence that said "this is not a...
Kevin, We are in Central Pa., about 230 miles from you. Our website is under construction but we do have a Yahoo site up at this time. Th...
Bob, Either of the bikes you mentioned wouLD be a great choice. Be sure to get a large enough sidecar and you will be in gOod shape. Feel free ...
Much has to do with the tires as related to trail and the camber changes that come when steering input is made. Much also has to do with weight distri...
We have run just a car battery with our own rigs for years. Thye last forever and cost less. Never saw any reason to try and compolicate things by ret...
Welcome aboard Sheldon!! Lots of info here. Would recomend reading Hal Kendall's sidecar books that are free for the download . The lkink is in my sig...
Tub, I reposted your message to SCT. Claude