Welcome aboard James very nice looking rig

I had a hard time hunting down a tire for mine, you have to be careful as it is tight for room. stay with the recommended size. I ended up getting the...

Just FYI you can get a single rocker switch that is dual I have mine wired that way

Cal go ahead and start a thread about your build here and you can use it to ask all the questions you want or need. you can keep it up dated as you g...

The way to check it out is you have to hook up one of the two wires to positive and one to ground, the motor will go one way then switch them and it w...

I don't think any sidecar manf. ever added any kind of ballast. I'm not a fan of lead as ballast for a couple reasons. a bag of concrete mix weighs ri...

in theory I would say that is correct but I have never tried that. I have a little more room than you and find I can do all my work on the bike with t...

I for one say you got a great deal. I see all the connecting rods; did you get all the mounting connectors that go on the bike as well. all that is pr...

good deal, glad it fit

all I can say is that is going to be a challenge. Good Luck and keep us posted about your progress

Wow,,, that is going to be close for sure, if you're not ready to start putting it together you could do what I did, leave it on the trailer and cover...

Charlie Iron Horse is a great place, and they have some really good people there. I was about to post that they were most likely closed but would...

Cal there isn't really a set width for your rig but you should not have any trouble getting the rig into the garage as long as it is the standard 8'...

Will Welcome to the offset world of sidecars, that is a beautiful rig you have put together there, glad to hear your first build has gone so well a...

agreed with the above, unless the 2000 is different from the 99 Hannigan is the only company I could find an easy steer for the Yamaha Venture and the...