I don't think the center of gravity is part of the problem, or the solution. If we were hanging the rig by a string it would. But moving down the road...

I did the Tri-Glide. I find it very easy to steer with this setup.

Do you run a manual bypass valve or one that is automatic based on oil temp?

Not that it matters, but if you look on line you'll find HD has list of there current manufacturing centers. HD bought the Tomahawk Boat Manufacturing...

Since you're discussing oil coolers, I have a question. I had to remove the HD accessory cooler and thermal valve/oil filter adapter in order to get t...

Thanks, I'll pass the information to the guy.

I have only been on the sidecar for a little over a year. My thoughts in the first month after I installed the car were very negative, but I gathered ...

You may want to check out the post by Rob98801 located under Complete Rigs Wanted. Look for the "250cc or Less + Sidecar" topic. There is a link ...

Good to know, thanks.

Lonnie Do you recommend adding weight to both the sidecar and the bike equal to the rider and the car's passenger while doing the alignment, or do y...

Aren't version A and C the same thing. They appear to be connected to a different point on the frame but wouldn't the effect on handling be the same? ...

Lonnie Do the rod ends used on the lower mounts on your liberty need to be lubed in any way?

I assume minimum weight is important. Think airplane fabric and dope. Modern materials use heat to shrink the synthetic materials over a wood frame.

You are correct, I am wrong, the damper rod does thread into the plug. I think I see why the after-market would build their spacer to work as the exte...

Just an FYI: The item circled in the shop manual picture shown in one of the earlier posts will not need to be removed or replaced when TriGlide trees...