Don't kid yourself, it can flip. Have fun. Lonnie

Not much gain in gear ratios with only the one tooth change (1.5%). 10% with using both 883 gears. (Did I gigure it right?) L.

Yep! Big Red with the two of us, my grip and a big pile of Judy's "stuff". Our Canadian riding Bud's were going to meet up with us in northern Idaho...

The 5 or 6 degree trees are to reduce trail on sidecars and trikes, vehicles that do not bank in the turns. This reduction of trail results in light ...

1- Without spacers it will drop your front end about 1". 2- Not much. How would moving the front wheel NOT increase the overall length of the bike?...

The easier steering is not a problem, it's a boon. It's like the difference driving a car with, or without power steering. You still have to steer t...

My bride likes the hack over riding B**** on a bike as she has a front seat to the world and can dress as she wishes instead of having to "Butch up" f...

The ball (and collet) mounts are used on sidecars with BMW /2 style connections for the lower mounts. URALs, Dneprs and CJs use this type of mount. ...

Joe, I don't think iron castings are in use any more on the Harleys. You might try hitting an area with a high speed grinder. If you have a f...

Glad to hear you'll be with us after all and are able to get in some saddle time. We're heading for Alberta, the Rockies and back down through BC an...

Here's a torsional suspension leading link chassis that is fairly easy to fabricate with .120" wall square tubing. It uses a 1" timken bearing axle t...

You can get the idea of shifting gears and the use of clutch and throttle in starting off, general control operations, but the handling of an ATV is d...

Why not take one to a bearing shop? They're probably standard timken bearings. L.

If you are in a high humidity climate you might also check the cannister for leaks. Lonnie

don't have a clue. Price comparisons are available at NADA or Kelley blue book. Prices vary a lot with the sales area. L.