Just got back yesterday from a 5 state tour (2,419 miles) of Idaho, Wyoming, Colorado, Utah and Nevada. Several mountain passes of over 11,000 feet, ...

Your 1300 is a naked bike. The full bodied GL1200 will probably need a subframe for a clean install. Plenty of power to pull the CJ and a reverse is...

A universal seat belt from most any parts house will give you the anchoring point and several pet shops (on line , or other) have harnesses that will ...

The 1993 Velorex has a 15mm axle and suspension is not designed for a 550# bike. You will find it wallowing in the turns and bottoming out during lef...

No friction washers here. Lonnie

With the Harleys (which are factory sidecar recommended) the increase in rear tire pressure is only 2PSI which is the same as for riding two up, 34 PS...

Check the darkside tire site for info on what is being used with your model bike. Probably a 195/55R/16. a 5.00/16 auto will fit your Spyder if you ...

Yeah! Don't do it. L.

If it's a dedicated rig the '09 and later Harley swingarms will accept a 16" automobile tire very easily on the rear. Greatly increases rear tire lif...

I'd suggest not getting too aggressive until you have a lot of sidehack saddle time. There's a lot to unlearn and muscle memory can be your enemy in ...

AI Hardbags.com in San Jose, CA has a bunch of them in different shapes and sizes. Lonnie

I can't concur with Jay's method since the XJ has a rear drum brake, not a disc and rotor. I sight down both sides of the front tire for centering n...

Add lean-out to push the rig to the left. I'd use a magnetic protractor (angle gauge) on the front brake rotor, wheel straight ahead, sit on the bike...

Most of us have seen them, but they were hung on old Indians. You might have to check out mounts at a Vintage Bike Rally or Show for ideas. I've go...

Better wait till tort reform passes congress. L.